Hot-Melt Labelers

Langguth hot-melt labelers include the E62, E40 and the E21/160-FVT18 for the FOOD AND PAINT Industry.

E62 Hot-Melt Labeling Machine

The Langguth E62 requires a minimum of operator attention and is the most cost effective labeling solution. Offering a 30% reduction in glue consumption when compared to conventional hot-melt systems, this rotary machine presents the successful synthesis of tradition and high-tech:

• reasonable purchase price
• available with different capacities
  • 300 cpm / E62-12/6-18
  • 400 cpm / E62-12/6-24
  • 750 cpm / E62-16/8-45
  • 1000 cpm /E62-28/16-60
• unique, thanks to low glue consumption
• rapid adjustment to suit other containers
• economical, since only a few format parts are needed

E40 Hot-Melt Labeling Machine

The new Langguth E 40-P Hot-Melt Labeler is the ideal machine for applying full-wrap paper and plastic labels to pint, quart and one gallon paint cans, where hot-melt is the preferred adhesive. The E 40-P is equipped with a patented, non-contact glue system that utilizes a single Nordson unit to supply hot-melt to both pick-up and lap glue applicators without any direct contact with the containers. There are no glue rollers, no open glue pots and no glue re-circulation in this unique system.

Unlike other labeling systems, the Langguth E 40-P has a single, hot-melt glue applicator that never touches the cans. Since the glue system is closed and the hot-melt is not exposed to the air, there are no fumes, no glue build-up and therefore no mess. Clean-up of the system at the end of the shift consits of purging air through the nozzles for approximately 20 seconds. The fully adjustable label magazine can be filled while the machine is running production, without the fear of loosing the registration.

E21/160 FVT18 Inline Hot-Melt Labeler

For in-line application of spot, around the corner and 3 sided labels on square and rectangular containers.The labeling with the Langguth E21 Hot-Melt labeler is based on the proven glue roller system where the label is pulled over and the glue transferred to the label in the process.

• Glue is applied in horizontal strips across the full length of the label with glue roller
• Adjustable glue film to suit the label and container used at any given time
• Standard available Hot-Melt glue can be used
• Proven technology with the existing stationary magazine from the 200 series machines
• Positive label attachment with Hot-Melt, using paper and/or OPP labels

Hot-Melt Labeler Images

E62 Hot-Melt Labeler

E40 Hot-Melt Labeler